.

0

2pin 5mm Strip to Wire Solderless quick connectors for 5mm IP20 SMD COB flexible LED strip

2pin 5mm Strip to Wire Solderless quick connectors for 5mm IP20 flexible LED strip
2pin 5mm Strip to Wire Solderless quick connectors for 5mm IP20 SMD COB flexible LED strip, 15cm 20AWG wire, pierce-through contact design
Quantity
Inquire Now
Add To Inquiry Cart
2-Pin 5mm Strip-to-Wire Solderless Piercing Quick Connector (with 15cm 20AWG Wire)

Take the frustration out of LED strip wiring with this premium 2-Pin 5mm Strip-to-Wire Solderless Piercing Connector. Engineered specifically for ultra-narrow 5mm wide IP20 (non-waterproof) SMD or COB flexible LED strips, this compact accessory features a state-of-the-art pierce-through contact design. Instead of relying on friction or surface contact, the internal pins physically pierce through the PCB copper pads from the back or front, creating a rock-solid, vibration-proof electrical bond without stripping or soldering. Pre-wired with a robust 15cm 20AWG red and black extension wire, it provides an immediate, reliable, and high-current connection for tight spaces, corners, and intricate cabinetry lighting.
Key Product Highlights
  • Advanced Pierce-Through PCB Tech: Internal tinned copper alloy pins pierce directly through the flexible PCB copper pads, creating a structural mechanical lock and a seamless electrical bond.
  • Ultra-Narrow 5mm Compatibility: Specially tailored to fit slim 5mm wide flexible light strips (such as 12V/24V SMD or COB layouts) without overlapping or damaging adjacent circuitry.
  • Solderless & Strip-Free Efficiency: Completely eliminates the need for soldering irons, solder wire, or wire stripping tools, reducing installation time by up to 80%.
  • Transparent Low-Profile Cap: Transparent housing allows light to pass through unobstructed, eliminating shadows or dark spots near the connection joint.
  • Heavy-Duty 20AWG Cabling: Pre-assembled with a 15cm (approx. 6 inches) high-quality 20AWG tinned copper wire, ideal for handling higher currents without overheating or causing voltage drops.
  • Wide Voltage Support: Fully compatible with both DC 12V and DC 24V low-voltage power systems, ensuring wide applicability across various DIY and professional lighting setups.
Technical Specifications
ParameterDetails
Product TypeStrip-to-Wire Piercing Quick Connector
Contact MechanismInsulation Piercing Contact (IPC) / Pierce-through PCB
Pin Configuration2-Pin (Single Color / Positive & Negative)
Compatible Strip Width5mm Only
Compatible Waterproof RatingIP20 / Non-Waterproof Flexible Strips
LED Light Types SupportedSMD / COB LED Strips
Wire Type & Gauge20AWG Dual-Color Red/Black Wire
Wire Length15cm (approx. 6 inches)
Working Voltage RangeDC 3V – 24V
Shell MaterialHigh-Transparency, Flame-Retardant Polycarbonate
Easy Installation Guide
  1. Cut the Strip: Cut your 5mm LED strip to size along its designated copper solder pads.
  2. Align the Polarity: Open the transparent cover of the connector. Match the"+"and"-"marked pads on your strip with the matching Red (+) and Black (-) wires.
  3. Insert the Strip: Slide the end of the LED strip into the connector slot until it firmly seats beneath the piercing metal pins.
  4. Lock and Snap: Press the transparent buckle down firmly using a pair of small pliers until the pins pierce through the PCB and the casing clicks permanently into place.
Package Contents
  • 1 x 2-Pin 5mm Strip-to-Wire Solderless Piercing Quick Connector with 15cm 20AWG Wire
 
 
 

Send Message